Cabinet Refinishing Denver | Great Savings

Cabinet Refinishing Denver

Serving all of Colorado

Here at Cabinet Refinishing Denver 303-573-6666 we always Allow the filled areas to dry, then use sandpaper to smooth out the surface of the cabinets.

Cabinet Refinishing Denver

If your repainting project is just a facelift for the cabinets, you don’t need to sand and paint the inside of the cabinets, mask off the interiors with painters’ tape for a clean finish but make sure you use blue tape which is less adhesive and will not pull the finish paint when you have completed painting and sand only the front surfaces and visible edges of the cabinet face frames.

Cabinet Refinishing Denver

Always Use a wood sanding block to prevent rounding over the wood edges. When sanding, there is no need to remove all of the old paint if it is sound and well adhered, just roughen the surface to provide the new paint to adhere with a firm, clean base for better adhesion. Cabinet Refinishing Denver always Pay particular attention to especially worn areas of old finish, which typically get the most use. Also be sure to sand over shiny areas to deglaze any remaining previous finish. Stubborn finishes may require rubbing with denatured alcohol and fine steel wool in order for best results.

Cabinet Refinishing Denver

If the old paint is flaking off in places, the original finish did not adhere well to the wood surface. This is typically due to moisture or greasy residue getting under the paint layer or into the wood itself, which can be expected in kitchens. Cabinet Refinishing Denver wants you to always Make sure and wipe down with a denatured alcohol prior to sanding and Sand these areas to bare wood and spot-prime with a stain-killing primer/sealer before repainting. Wherever you sand down to bare wood, try to blend or “feather” the edges where the old paint meets the wood so the new paint will lay flat, and the paint edges will not be visible or reveal through the new finish.

Thoroughly blow off the sanding dust from all surfaces. If you have a pneumatic air compressor, use high-pressure air to blow the dust out of crevices or molding details. Wipe down the areas to be painted with a tack cloth to pick up any remaining sanding residue. So if you’re looking for the right company to get your cabinet paint it right the first time give us a call here at cabinet refinishing Denver and we will get back to you soon as possible thank you.

“Cabinet Refinishing Denver.”Also Services, Denver Co. Aurora Co. Larkspur Co. Castle Pines Co. Parker Co. Highlands Ranch Co. Littleton Co. Centennial Co. Lakewood Co. Castle Rock Co. Jefferson County, Adams County and Douglas County

to see more cabinet refinishing tips click on the link below

cabinet refinishing Denver